Duracoat DuraFlex
$7.95
DURACOAT-DIRECT
2 oz. of DuraFlex, Flexble additive increases the flexing properties of DuraCoat. It can be used at up to 10% of volume, Other sizes available during checkout.
|
Duracoat Hardener
$6.95
DURACOAT-DIRECT
1 oz. of Hardener, while included with DuraCoat, it is sold seperately in case you need more. 10-1 to 14-1 is the recommended mixing ratio range of DuraCoat to Hardener, Other sizes available during checkout.
|
Duracoat UV Hardener - Outdoor Use
$8.50
DURACOAT-DIRECT
1 oz. of UV Hardener, Optimize DuraCoat for outdoor applications with UV Hardener. In exterior conditions, UV Hardener will keep the color from fading longer than regular Hardener, Other sizes available during checkout.
|
Duracoat Reducer DCR
$8.50
DURACOAT-DIRECT
4 oz. Duracoat Reducer. Other sizes available during checkout. DuraCoat® may be reduced up to 20% for proper atomization which allows for a smooth, even flow. Also used for cleaning air brushes, Other sizes available during checkout.
|
Duracoat Retarder
$7.95
DURACOAT-DIRECT
2 oz. Duracoat Retarder used to slow down the evaporaton rate of Duracoat, and help eliminate dry spraying and blushing. It can be used at up to 20% of volume, Other sizes available during checkout.
|
DuraCoat Flattening Agent
$10.50
DURACOAT-DIRECT
2 oz. DuraCoat® Flattening Agent can be used to give DuraCoat less sheen or gloss. Use up to 10%, Other sizes available during checkout.
|
Duracoat Quicken
$8.50
DURACOAT-DIRECT
1 oz. DuraCoat Quicken is designed to accelerate the "initial cure" and "final cure" of DuraCoat (Overnight) clean out Sprayer in 30/40 minutes, DuraLaser, DuraPearl and DuraVelvet. Quicken can be used to accelerate the cure to most any time frame thus adapting DuraCoat to specific production and shipping requirements. The maximum mix ration is 1 part Quicken to 8 parts of catalyzed coating. The more Quicken added to Duracoat the faster the cure time, Other sizes available during checkout.
|