As an average gun owner, can I properly apply DuraCoat products without
training?
Absolutely! DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was
designed for the average gun owner. Preheating, baking and blasting are not required.
Expensive, space consuming equipment is not needed. Simply clean and degrease
the surface prior to application. If you don't have access to an airbrush, HVLP
spray gun or conventional spray gun, our EZ Airbrush (#1SAB) is all the equipment
needed and sells for less than $25.00.
If I have a problem applying DuraCoat, what can I do?
Contact us from 8:00am to 5:00pm (Pacific Standard Time) Monday through Friday and we will make suggestions that will help you to complete your project. Thousands of customers just like you have successfully DuraCoated weapons without problems and with professional results. DuraCoat is backed by some of the top professionals in the business of refinishing firearms.
How durable is DuraCoat?
DuraCoat is permanent. With normal use, a firearm finished with DuraCoat will
last several lifetimes.
What is DuraCoat?
DuraCoat is a two part chemical coating. Unlike other firearm finishes, DuraCoat
was created specifically for firearms. Other firearm finishes are "spin-off's"
from other industries.
Is DuraCoat Teflon based?
No. Teflon is a lubricating coating which is great for internals, but will not
wear as well as DuraCoat on the exterior surface of a firearm. DuraCoat's combination
of elasticity and hardness creates a finish impervious to impact, scratching
and the elements. Some users say DuraCoat displays some lubricating qualities,
but this phenomenon was never intended when DuraCoat was created.
Do I have to be a certified finisher to purchase DuraCoat products?
Absolutely not! DuraCoat can be purchased by anyone. DuraCoat was designed for
gun owners with little or no firearm finishing skills.
How do I apply DuraCoat?
DuraCoat can be applied by airbrush, conventional spray gun, or HVLP spray gun.
Can DuraCoat be brushed on?
No, absolutely not. DuraCoat is for spray application only.
Will DuraCoat adhere to hard coat anodizing and Parkerizing?
DuraCoat loves hard coat anodizing and Parkerizing as a base. Both processes
leave a good rooting surface for DuraCoat.
How much DuraCoat is needed to finish one rifle?
A 4 oz. container of DuraCoat will coat 1-2 long guns or 2-4 handguns.
Are the Peel 'n Spray templates reusable?
Yes. Most patterns can be used up to 6 times. The MirageFlage pattern is difficult
to reuse because of the many angles. To reuse the template, remove from the
firearm and place on wax paper for future use.
Do I need a special degreaser?
Yes. Some degreasers, especially those used in the automotive industry, can
leave a residue. This residue will form a barrier between the surface and DuraCoat
causing a coating failure. We manufacture TruStrip degreaser solely for the
firearms industry. TruStrip is capable of cleaning the contaminates commonly
found on and in firearms and will not leave a residue.
Do I need a special solvent to clean my airbrush or spray gun?
Lacquer thinner will work, but clean your equipment with DuraCoat reducer occasionally.
This will keep your airbrush or spray gun in top working condition.
Is reducing DuraCoat required?
Depending on your spray equipment, spray technique, climate and environment
your DuraCoat may or may not need reducing. If your DuraCoat does not lay down
smooth on the surface of your firearm, it most likely needs to be reduced. Always
have some DuraCoat Reducer on hand as it may be required on given days due to
weather conditions. DuraCoat Retarder Reducer cures problems normally occurring
in high humidity weather. One of these high humidity problems called "blushing"
makes the DuraCoat appear cloudy. Another called "dry spray" occurs
when some of the DuraCoat dries before it reaches the firearm and causes a rough
or dusty surface.
Can I blend DuraCoat colors together?
Yes. All DuraCoat colors can be intermixed. With a handful of stock DuraCoat
colors, you can create an infinite number of colors by blending them.
When is DuraCoat fully cured?
DuraCoat is dry to the touch in 20 minutes, can be handled in 1 hour and is
ready for use overnight. Although DuraCoat will gain most of its final hardness,
elasticity and chemical resistance over a 4-6 week period, time will continue
to enhance DuraCoat's characteristics over a lifetime. DuraCoat, like fine wine,
gets better with age. As we say, "DuraCoat wears in, not out."
How do I apply DuraCoat to wood?
Degrease and lightly sand wood surfaces. Use DuraFil to remove any scratches
and dings, then apply DuraCoat. Allow to dry overnight. Do not bake.
I hunt along saltwater. Will DuraCoat withstand the salty environment?
Certainly. DuraCoat is well suited for salty environments. One of DuraCoat's
attributes is its extreme ability to resist salt corrosion. A firearm coated
with DuraCoat simply will not rust...EVER!
What is the shelf life of DuraCoat?
The shelf life of DuraCoat is 12-18 months if properly sealed and stored in
a cool, dark place. The shelf life of DuraCoat hardener is 6 months, but can
be extended by sealing it in a zip lock bag and placing it in a refrigerator.
Will DuraCoat burn off my barrel?
DuraCoat can withstand temperatures as high has 500-600 degrees F. With "normal"
shooting, your barrel will never get close to being that hot. If you are fortunate
enough to own a transferable machine gun, or if you like to "blaze"
with your semi-auto, do not put DuraCoat on your barrel, as your barrel temperature
will rise to over 1,000 degrees F. In those cases, use DuraHeat. Our DuraHeat
coating can handle temperatures up to 1,800 degrees F.
How easy is DuraCoat removed?
Not easy at all. The elastic nature of DuraCoat resists blasting. A qualified
individual, with the proper blast media, can safely remove DuraCoat without
damaging the surface of the firearm. Be careful. In most cases, we recommend
lightly blasting the surface, being cautious not to remove any DuraCoat. Just
"beat up" the DuraCoat giving it "tooth" so your new application
of DuraCoat has something to adhere to.
Which is more durable, DuraCoat or DuraBake?
Both DuraCoat and DuraBake are extremely durable. The advantage of DuraBake
is its availability in a convenient aerosol can. The advantage of DuraCoat is
it does not have to be baked and is available in an incredible number of colors.
How come other firearm finish manufacturers boast hardness, but make
no mention of elasticity?
In the case of firearm finishes, a common misconception is "harder is better".
This is faulty "old school thinking". Hardness means brittle and brittle
means chipping. DuraCoat, being elastic, will not chip. If your DuraCoat chips,
it means you have a preparation problem. Most likely, the surface was not clean.
Elasticity provides protection by "giving" when confronted with impact.
Elasticity also helps prevent scratches and mars.
|